- Step 1: Wash Your Wall
- Use an ordinary household cleaner. Rinse and let dry completely.
- Step 2: Grab Your Graffiti
- Place your sheet of Graffiti face down on ahard surface. Give the entire back a firm, brisk rubdown with the white burnisher provided.
- Step 3: Get It Straight
- Using the Stick Strips provided, position your sheet of Graffiti on the wall so it reads with the letters facing you. Align a carpenter’s level with the bottom of a line of type. Reposition the Stick Strips as needed until the text is level.
- Step 4: Peel Away The Stiff Paper
- Using the Stick Strips as a hinge, flip up the sheet of Graffiti and pull away the stiff paper and discard it.
- Step 5: Burnish It Down
- Using the burnisher, firmly rub down the entire surface of the see-through paper.
- Step 6: Peel Away The See-Through Paper
- Keeping the transfer paper flush with the wall, bend back one corner of the see-through paper and, peel it away at a sharp angle as shown.
- Step 7: Adding 3D Letters
- Remove the paper from the tops of the double-stick tape found on the back of each three-dimensional letter. Position each 3D letter precisely over its corresponding Wonderful Graffiti™ letter on the wall.